How to Specify SkyScape
SkyScape commercial aluminum canopy systems are specified under CSI MasterFormat Section 10 73 16. This guide walks you through the specification process from design phase through submittal — and the Spec Builder generates your specification document in minutes.
Where Canopies Live in the Spec
Commercial aluminum canopy systems are specified under CSI MasterFormat Division 10 — Specialties, Section 10 73 16 — Canopies. This section covers factory-fabricated aluminum canopy systems including cantilevered, hanger-supported, and post-supported configurations.
When writing SkyScape into a project specification as basis-of-design, reference Section 10 73 16 and specify SkyScape Architectural Canopies as the named manufacturer. The Spec Builder generates complete specification language in this format.
Division 10 — Specialties
Canopies
Factory-fabricated aluminum canopy systems — cantilevered, hanger-supported, and post-supported configurations
What to Include in Your Specification
A complete SkyScape canopy specification should address the following elements. The Spec Builder guides you through each one.
Canopy Type & Configuration
Select the structural system — cantilevered, hanger-supported, or post-supported — based on building conditions, wall construction, and design intent.
Dimensions & Projection
Specify canopy width, projection, and height above finished grade. SkyScape can accommodate custom dimensions for most commercial applications.
Substrate & Attachment Method
Identify the wall substrate — concrete, masonry, structural steel, or light gauge framing — and the attachment method. SkyScape provides connection details by substrate type.
Wind & Snow Load Requirements
Specify the design wind speed and ground snow load for the project location per ASCE 7. SkyScape's engineering team sizes members and anchors to meet project-specific load requirements.
Finish & Color
Specify AAMA 2604 high-performance powder coat finish and select from SkyScape's standard color program or request a custom color match.
Submittal Requirements
Specify that the contractor shall submit shop drawings, engineering calculations, and PE-stamped documents for architect review prior to fabrication.
Use the Spec Builder
The SkyScape Spec Builder is a free, interactive tool that walks you through each specification element and generates a complete canopy specification document you can use directly in your project spec book. It takes minutes and covers everything from system type to finish standards.
Specification Support from Our Team
SkyScape's engineering team works directly with architects throughout the specification process. We can provide:
- Basis-of-design language formatted for your spec
- CSI Section 10 73 16 specification language
- Wind and snow load calculations for your project location
- Submittal packages including PE-stamped shop drawings
- Response to RFIs during the bid and construction phase
Ready to Write SkyScape Into Your Spec?
Open the Spec Builder or submit your project details and our team will respond within one business day.